HARMAN KARDON DVD50
Manual de Usuario

Setup Menu
To change the default setting, press the � / ¤ Navigation Buttons e until the desired choice is highlighted, and then press the Enter Button `. Note that the circle for your choice will fill in, and the menu will return to the default listings. If you wish to change the default to a language other than those shown in the menu, press the ¤ Navigation Button e until the �Other� line on the bottom is highlighted. Consult the Language Codes list on page 38 for the desired language. Press the Enter Button `. Next, enter the number for the desired language code using the � / ¤ Navigation Buttons e. Press the buttons until the desired number appears in the first position, and then press the � Navigation Button e to move to the next position. Continue to enter the number using the � / ¤ Navigation Buttons e at each spot and then move to the next one. When all four digits have been entered and the OK box is highlighted, press the Enter Button ` to store the selection in the DVD 50�s memory. Although the word �OTHER� will appear in the settings list, your desired choice will be entered. Note that when a default language is selected, it will be used whenever that language is present on the DVD disc being played. However, when that language is not present, the language used will be the one preprogrammed into the disc itself. (Typically, that default will be English for discs sold in Region 1, but the selection may vary at the discretion of the disc�s producer.) Although the default determines the language that will be used when a disc is first put into play, the language may easily be changed at any time through the use of the Menu Bar. See page 30 for more information. If you have no other changes to make after setting this default, press the Menu Button 28 to remove the Setup Menu from the screen, or press the Play Button g/# to begin or resume playback. Subtitle Language Selection The Subtitle Language option sets the default choice for the language that will be displayed when subtitles are turned on during DVD playback. To select the Subtitle Language default, you must be viewing the Setup Menu (Figure 1), which is available by pressing the Menu Button 28 while the unit is in the Stop Mode. At the Setup Menu, press the ¤ Navigation Button e until the Subtitle Language option is highlighted. To change the default Subtitle Language, press the � Navigation Button e and note that the list of system defaults will be replaced with a list of the available options, as shown in Figure 3. The current subtitle language choice will be indicated by a filled-in circle on the list on the right side of the screen.

Figure 1 To navigate through the settings on the screen, use the � / ¤ Navigation Buttons e to scroll up or down through the list of settings or the list of options. Press the � / � Navigation Buttons e to move back and forth between the list of settings of the left side of the screen and the list of options for those settings on the right side of the screen. To choose a specific option, use the � / ¤ Navigation Buttons e until it is highlighted. Press the Enter Button ` to select the choice. When a selection is made, you may confirm the choice by checking to see that an orange dot fills the circle next to the choice. Audio Language Selection The Audio Language option sets the default choice for the language that will be played from a DVD disc. To select the language default, you must be viewing the Setup Menu (Figure 1), which is available by pressing the Menu Button 28 while the unit is in the Stop mode. Audio Language Selection is the first option, so it will automatically be highlighted in dark blue when the Setup Menu is displayed. To change the default Language, press the � Navigation Button e and note that the list of system defaults will be replaced with a list of the available options, for the audio language setting as shown in Figure 2. The current language choice will be indicated by a filled-in orange circle on the list on the right side of the screen.

Figure 3 To change the default setting, press the � / ¤ Navigation Buttons e until the desired choice is highlighted, and then press the Enter Button `. Note that the circle for your choice will fill in, and the menu will return to the default listings. If you wish to change the subtitle default to a language other than those shown, press the ¤ Navigation Button e until the �Other� line on the bottom is highlighted. Consult the Language Codes list on page 38 for the desired language. Press the Enter Button `. Next, enter the number for the desired language code using the � / ¤ Navigation Buttons e. Press the buttons until the desired number appears in the first position, and then press the � Navigation Button e to move to the next position. Continue to enter the number using the � / ¤ Navigation Buttons e at each spot and then move to the next one. When all four digits have been entered and the OK box is highlighted, press the Enter Button ` to store the selection in the DVD 50�s memory. Although the word �OTHER� will appear in the settings list, your desired choice will be entered. Note that when a default subtitle language is selected, it will be used whenever that language is present on the DVD disc being played. However, when that language is not present, the language used will be the one prepro-

Figure 2

19 SETUP MENU